GJD 910 DygiZone

The DygiZone security lighting control system has an attractive modern design and all the features of the existing Solitaire controllers (see below), Additional features include: back-lit LCD digital display; two timers per zone; compatibility with existing Opal XL detectors and Solitaire expansion units; on-board microphone to provide voice option when detection occurs (optional for each zone); keypad lock feature; up to 3 keypads per system.

Solitaire 4 Zone Touch Control

Individual manual lighting override for each zone, 12 x 24 hour detection indicators (flash on detection). 3 x mode indicators per zone – audible, automatic, lights activated. Selectable audible sound on detection, 24 hours or night only. Individual light-on adjustment time from 1 to 24 minutes, option of two additional touch controls in alternative locations.

Solitaire Expansion Unit

A compact mains switching unit to be used in conjunction with the Solitaire and DygiZone touch controls. The versatility of these systems is that they can be expanded to control up to 30,000w of lighting. Four-zone requires a minimum of 2 x expansion units.

Opal XL Detector

An inconspicuous high quality 35-metre 12-volt external sensor designed for use with all GJD security lighting controllers - safe, reliable and low voltage. An internal bracket supports a plug-in electronics module, which is fully adjustable horizontally and vertically.

Opal Elite Detector

A robust external 35-metre passive infrared intruder detector designed to give reliable event-based triggers that simultaneously or individually control cameras, VCR’s, DVR’s and low voltage switching requirements.

Opal RFX Wireless Intruder Detector

An external 35-metre passive infrared detector that transmits reliable event-based triggers to the weatherproof RFX-3 receiver (see below). These combined units enable the simultaneous or individual control of cameras, VCR’s, DVR’s and virtually all low-voltage switching requirements.

RFX 3 Channel Receiver

This unit is designed to be used in combination with the Opal RFX Wireless Detector (above) to enable the simultaneous or individual control of cameras, VCR’s, DVR’s and virtually all low-voltage switching requirements.

CJD D-TECT² and D-TECT³ Movement Detectors

These GJD Precision Movement Detectors are fully compatible with all major CCTV systems. Features include: front and rear tampers triggering one alarm output; 2 x volt-free configurable relay contacts; 2 x negative switched outputs, one combined with a photocell for the control of security lighting; IR programming locks out if inactive for more than five minutes; selectable pulse count sensitivity adjustment; LED enable / disable; robust metal housing, chrome plated zinc alloy; easy camera field of view alignment; beam angle adjustment.

GJD D-TECT-50 Movement Detector

The GJD D-TECT-50 complements GJD's existing D-TECT range of external CCTV detectors. The D-TECT-50 is a fully adjustable quad PIR with the following features: range of between 25m and 50m; 2 lenses provided to cover between 10 and 30 degrees; 2 locking screws to secure the pan and tilt in position. Available in silver and gunmetal finishes.